After our Bumpside Dually Crew Cab article the other day, I came across Old Ford Crew Cabs.com What an interesting site! While browsing through the site, I found out that Ford started producing crew cab trucks in 1965 and there was even a few companies converting Ford trucks before that. Hopefully we will soon be featuring a few crew cab trucks from the 59-60 era.
I am searching for a 67-72 style old ford crew cab. I just need the cab for a project of mine. I want to take the cab off of my ’68 F750 and replace it with a crew cab and F100/F250 front clip. I also intend to put a lwb bed on the truck. The end result will be a ’67-72 F250 long bed crew cab on a F750 frame.
Thanks,
Dan (dolinick@hotmail.com)
Hey Dan,
Sounds like an interesting project! Hopefully you can find a cab!
There is a late 60s cc at the irregation sales and water district in Hot Springs Mt. call them for the irregation sales place number
So, did you ever find your cab and put this together?
Not yet. I haven’t found a cab. I have been busy with other things so I am not in a huge hurry to do anything with the F750. I got a new ’67 F100 for my everyday driver but it needs brakes and a manifold gasket.
I’m looking for a 67-72 bump side crew cab 4×4 short box if you know anyone selling.
Hi Im looking for a 19-75 ford crew cab in good condition preffered inline 300 six with 4 speed….
WANTED 1960-1975 4X4 CREW CAB PROJECT OR FINISHED. PERFER CLEAN BODY WITH LITTLE TO NO RUST.
THANK YOU FOR ANY AND ALL REPLYS. GOD BLESS
2012 feb 26 I have a 1966 ford crew cab F750 cummins one ton 4×4 truck 4 speed auto w/overdrive 4 inch egsaust to 5inch rideing on 37s toyo m/ts 60 front 70 rear I drive it everywhere .
Wow…would love to see pics of that…any chance you can send me a few?
Marty missionkraft@shaw.ca
I have a 1979 f250 4wd crew cab for sale. its all stock,except for a 7ft flat bed. Was from Oregon,so,NO RUST!nt even in the roof gutters like they all seem to get!, 400,a/t, 44 front,60 rear,205 tcase. yellow/tan,original paint. 121k miles.Ok, the bad,stored for the last 10 or so years.It runs,but should be gone thru for a drive to ? Will not pass CA smog, so, think about your states smog laws. Thanks,email for pics, $6500.00 Located in northern ca near Sacramento
Do you still have the ’79 F250 crewcab for sale? I am not far from Sac and would be interested. Thanks
I have a 79 F250 crew with 351M and ZF5spd tranny. From Dallas Texas little to no rust original body. looking to get $7000.00 shoot me an email if your interested joseph.hope.heath@gmail.com
Looking for a 1948-54 crew if anyone know where to get one
I am looking for a 1965-66 crewcab please contact me with any leads 920-382-6580
I’ve got a 77 F250 Crew Cab 4×4 shortbed no rust in Tucson AZ for sale for $9,000
460, dana 60’s, np435, 35×12.50×18 Toyo Open Country Muds on 18×9 Moto Metal wheels.
mas_fina@hotmail.com
I have three Mercury Crew Cabs, a ’60 a ’65 and a ’66
I drive the ’66 Crewlcab daily, ’65 is going on a 12v Cummins 4×4 chassis and not sure what I m doing with the ’60 three door crewy yet
-Shiny
waybackgarage@gmail.com
Forgot to add that the ’60 three door crew cab is a factory 4×4, pretty cool beast!
I would put pics up but not sure how on this site
-Shiny
Shiny, you can contact me through the contact form on our submissions page and then email photos. Thanks!
Curtis, you need to edit the pic of my CrewlCab please. It is not a FORD, it is a MERCURY
Thanks
-Shiny
I have a 1977 Ford F250. I am looking for upper crew cab trim moulding with rubber inserts for the back doors and the small piece that goes in between the doors.
I have a 67-72 bumpside crew cab prerunner project truck that was possibly built in the early to mid 70’s by the late great Frank Vessels. The truck is fully caged and has bent beams on the front and has a 30 gallon fuel cell. The truck is a project right now as I found it with no engine, trans, bed or front clip. I have all the parts for it now but I may be putting it up for sale.
Sounds like a great truck Geoff. We might be interested in posting some pictures and info about it if you can send them. Or if you decide to sell it we have a new classifieds section in the links in the top navigation of the site.
Did you sell your truck?
Im looking for a 66-79 ford crew cab for my dad! I have a 78 and 79 single cab ford but he wants one that the whole family can pile up in and take off to the beach!!
Hi to all! I came across this Great web site and can say that it’s AWSOME! I live in San Diego, and like many of you surfing the web,I too am looking for a crew cab (no luck) so I r purchased a 1966 Ford F100 Custom Cab 4×4 long bed.My idea is to convert it to a crew cab with the use of a donor cab with doors (found one in local junk yard for $400). For any one who is an owner of a crew cab or is out there who has done this or is in my shoes of wanting to do it, I’am asking on behalf of the many out there with the same idea for your help please, The information needed are pictures (the more pics the better to understand) with the measurements (specs) of an actual crew cab (1966) showing in depth the length,height and width of cab (plus frame) and doors as well. Any metal cuts where welds show assembly of conversion when made by Ford or coach works and any other information would be most useful. THANK YOU!! and MUCH APPRECIATED for any help!
contact me,I have a 72 ford crew cab.
Send us some pictures if you can. Click on the contact page, thanks.
I’m searching for a 1973 to 1986 Ford F-250 or F-350 crew cab manual transmission 4×4 to buy.
I have 85 f350 with a brand new motor not 4×4 . Is a Dully,